Check out this free tutorial for how to sew a ruffle dress! No pattern necessary. This ruffle dress tutorial is a great beginning sewing project. Make one for every holiday! Just change up the fabric colors/patterns. #sewing #sewingtutorial #sewaruffledress #sewingtutorials

How To Sew A Ruffle Dress – A Quick 3 Tier Ruffle Dress Tutorial For A Little Girl

How To Sew A Ruffle Dress

Check out this free tutorial for how to sew a ruffle dress! No pattern necessary. This ruffle dress tutorial is a great beginning sewing project. Make one for every holiday! Just change up the fabric colors/patterns.

How To Sew A Ruffle Dress

Learning how to sew was not an easy thing for me to do. I had to accept that I was going to fail…often.

I had to come to terms with my seam ripper and I had to start small and work my way up.

Once it clicked though, it was magic!

Related: Applique Tutorial

Now I love to sew all kinds of things, but my true passion is sewing dresses and skirts for my little girl. I sure hope my son doesn’t feel deprived (but he is well stocked in cool pajama pants), but something about making girly boutique clothing makes me giddy!

This dress is no exception.

It’s not a straightforward pattern, it’s kind of a mish mash of two or three of my favorite patterns, but it’s super easy for even a beginner to tackle if they are willing to have the patience to tough it out.

Related: How To Sew Pants: Basic Wide Leg Pants Tutorial | Basic Sewing

Here are the skills needed (beyond basic sewing skills) to sew a ruffle dress:

  • Ability to ruffle (I use the good ol’ “pull the bobbin thread” form of ruffling. I have also used the method in this video:
  • You must know how to hem…this is pretty basic, but you’d be surprised how many struggle with hemming. (NOTE: You could just leave the bottom of the dress unhemmed if your like the serged look.)

That’s it!


  • The top to your dress: This dress has an empire waistline. You can either grab a shirt (I don’t recommend a knit fabric…but if you feel comfortable working with knit, go for it) and cut it (Put the shirt on your child, an empire waistline is just below their chest area. Mark where you want the dress to begin and add a half inch seam allowance. Cut along the line.) OR you can use another pattern top that you like. I used the Simply Sweet Top pattern from Carla C on It has adorable ruffled straps and because they are elasticized, this dress can eventually become an empire waisted shirt to wear with jeans when Lizzie gets older!
  • Thread
  • Fabric for skirt of dress. I recommend easy to sew cotton novelty fabrics.
  • Sewing Machine
  • Serger (this is my serger) is optional, but once you learn to sew and want to sew a lot…you’ll want one!
  • Pins or clips (clips are awesome!)
  • Iron and Ironing Board

Directions for how to sew a ruffle dress:

1. First you need to figure out what size ruffles you will need. To do this, you’ll need to measure your child. Since this dress is empire waisted, you’ll measure just below your child’s chest. Measure from below chest (where you intend the shirt to stop and the skirt to start) to where you want the skirt to hit. I chose knee length.

2. Next you need to determine how much fabric you’ll need. I used the ruffle measurements from the Tiered Twirl Dress on

You can either use ruffle measurements from another pattern, OR you can use this handy dandy ruffle calculator here! Where it asks for waist measurement, you’ll want to put the measurement you took from right below the chest. For length you’ll want to put the measurement you took for how long you want the dress to be. For tiers, I have 3 tiers to my skirt, so I would put 3.

{Something to keep in mind: Ruffles actually give you a LOT of grace. As long as the fabric you are ruffling is at least double the length of the fabric you are attaching it to, it will work.}

Rule of thumb: 2 x’s the fabric you’ll have a slight ruffle; 3 times or more and you’ll have a fuller ruffle. The dress I made for my daughter has a very full ruffle and a VERY flouncy twirly skirt!)

3. The first rule in sewing is that you begin with WASHED and DRIED fabric that has been IRONED. Wash your fabric as you intend to wash the garment. Do not skip ironing! I used some fun cotton prints for this dress. I found them on sale at JoAnn’s. It’s novelty fabric, but since it’s a little girl’s dress I’m not super concerned with heavy duty garment fabric.

4. Now you’ll want to cut your ruffle pieces. If your fabric isn’t long enough to cut the lengths you need, no problem you can just sew multiple lengths together.

Just be sure to add at least 1/4 or 1/2 inch to the length to allow for a seam allowance. I love to use this awesome tool to cut my fabric along with ripping the fabric by hand (don’t attempt if you aren’t confident):

Love this tool

5. I serged both sides of each ruffle piece. This keeps the fabric from unraveling in the dryer. If you don’t own a serger (I own this one from Brother, it’s affordable and a total time saver. LOVE it!), you can just try using your machines zig zag stich. Just make sure it catches the side of the fabric.

6. I start at the bottom and work my way up. Because I like to hem things FLAT, before I even make my first ruffle, I go ahead and add a half inch hem to the bottom tier. I just press the bottom of the bottom tier up 1/2 inch and top stitch.

My hem. So much easier to work with when FLAT!

7. Next you are going to sew your bottom tier to your middle tier. Mark the middle of both pieces with a pin or a washable marker.

Related: Quick and Affordable DIY Coasters

Ruffles. They are in almost everything I make so I try to do them as painlessly as possible!

8. Now I sew a straight line across the top of my bottom tier (the side opposite the hem) about 1/4 inch from the edge. I make sure my tension is very low and my stitch length is long.

I do NOT back stitch.

When I take the fabric from the machine, I gently start pulling on the thread that came up through the bobbin. It should pull pretty easily. You’ll notice ruffles form.

Continue to pull on the bobbin thread a bit from each side until your bottom tier is the same size as your middle tier and your ruffles are uniform.

9. Pin your bottom tier to your middle tier carefully with RIGHT SIDES of fabric facing each other. Go ahead and fix the tension and stitch length on your machine to a normal straight stitch.

With a 1/2 inch seam, sew the two pieces together. (After you have the two pieces sewn together, you can remove the stitches you made to make the ruffles. Either pull them out gently or tug on them until the strings break.)

Now you can press the seam UP and top stitch the tiers together.

You can’t see it here, but the green is unruffled and the white is ruffled to fit the green. I pin them together before I sew them together.
Top stitching

10. Repeat this exact process (steps 7-9) to join the middle tier to the top tier.

Sewing sides of skirt together.

11. Now that you have all three tiers joined, you are ready to sew up the side. Join the raw edges of the skirt with right sides facing together. With a 1/2 inch seam, sew the two sides together (I serge the edges at this point as well). Now your skirt is formed.

12. Now you’ll need to get your dress top. Go ahead and grab it or make it according to pattern directions.

13. Mark the middle of the skirt AND the top on the back and front with a pin or washable marker.

14. You’ll want to repeat steps 8-9 to join the top tier and the dress top.  (I tend to turn the skirt inside out and set the top inside of the skirt to make sure I have right sides facing)

15. You are DONE!

This is my princess in her Ruffled Tier Dress for her Christmas party!

If you are a total newbie to sewing, I can’t recommend the projects over at enough. The patterns are easy to understand, come in PDF format so you can use them over and over again, and are so much easier than tissue paper patterns!

Let me know if you make this dress! I’d love to see your adaptation. Just be sure to link back if you post this on your blog. 🙂

Related: How to Start a Money Making Blog

This is not a paid post. The links are affiliate links so I might make a few pennies if you buy, but really I just have a GREAT desire for people to learn how to sew and this post was not made with compensation of any kind in mind at all!

Published by


Heather is the creator and owner of Family Friendly Frugality. She calls Texas home and is married to her best friend. With 2 children 22 months apart, she has her hands full. So full that she decided to start blogging as a hobby. That hobby blew up into a full time job. Now she's got the husband, the kids and the blog. We're not exactly sure what she was thinking, but she's too busy for us to ask. Find Me On Google +

29 thoughts on “How To Sew A Ruffle Dress – A Quick 3 Tier Ruffle Dress Tutorial For A Little Girl”

  1. This is a beautiful dress!! I do not sew, but my mother does, LOL!! I am definitely going to show this to her so she can make a few dresses like this for my 16 month old daughter!!

  2. Do yu not recommend using the serger for the gathering? I have a Brother 1034d and do all of my ruffling and gathering with it. Would it work for this?

    1. You can Misty…I just find that that method of gathering makes the thread break too often on my serger (I have the same kind) and I hate threading that darn thing, LOL

  3. Wow love it, well let me tell you that I don’t really know how to sew but I am so willing to learn how. I just purchase a pattern from the store and the dress is just like this one, and let me tell you i had so much trouble trying to get the 3 pieces together to the top. I see this tutorial and I think I have an idea. I just keep looking for a video on how to sew this dress but i have not found one. I really want to learn but I am a visual learner,this is were I have problems with the ruffles. your little girl is beautiful I don’t have kids but i do have nieces and I want to learn sooooo bad! thanks for the tutorial
    thank you so much

  4. Good job on your tutorial. The dress and your daughter are so cute. I love making these for my granddaughters. They grew out of the dresses so fast that I’ve been making skirts instead of dresses. I also made skirts out of the outgrown dresses by simply cutting off the skirt part and adding a casing and elastic. I use 1 width of the fabric (selvedge to selvedge) for the top tier, 2 for the 2nd and 4 for the 3rd. I leave the selvedges on so that the seams are finished and I serge after sewing the ruffle on. It’s a little messy during the process, but oh so neat after the serging is done.

  5. Hi, I can’t read the tutorial because of the Hawaiian Punch ad. Is there a way to get rid of it? Super cute dress!

  6. Adorable dress. I’m planning on making matching dresses for my granddaughters, and I am wondering if anyone who had made this has left off the topstitching? I’m thinking I might like it without it. Any opinions?

    1. You could leave off the top stitching. I just personally think it gives the dress a more finished look. (also cuts down on the ironing just a tad)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Exit mobile version